管道預制機械組對中心（卡盤+卡盤）

管道預制機械組對中心（卡盤+卡盤）Pipe Fabrication Mechanical Fitting-up Centre(Chuck + Chuck)

產品型號：PFFUC-16Ca/24Ca/32Ca

Model: PFFUC-16Ca/24Ca/32Ca

適用管徑：DN400/DN600/DN800

Pipe Diameter Applicable: DN400/DN600/DN800

性能特點：適用于“法蘭+管子+法蘭”類管段的組對；組對效率提高；2個卡盤組對機頭；2個支撐移動小車；1條機加工軌道；組對機頭分置軌道兩端；根據管段長度軸向居中行走；管段兩端同步組對（組對機頭上下左右前后6個方向電動移動）；鋁合金線控盒操作

Performance features:  suitable for fitting up spool piece with “flange + pipe + flange” ; fitting up efficiency increased ; two fitting-up Chuck heads; two movable supporting trolleys; onemachined rail; fitting-up headsinstalled separately at both ends of the rail and travel along the centerlinein the axial direction according to the length of spool piece; fitting up synchronously at both ends (fitting-up heads move in six directions automatically: up/down/left/right/back/front); operated with an aluminum alloy wire control box.