<ol id="rlfdz"></ol>

          <noframes id="rlfdz">

            <track id="rlfdz"></track>

              <menuitem id="rlfdz"></menuitem>

                    產品中心PCBanner 產品中心wapBanner


                    首頁 > 產品中心 > 預制中心系列 > 管道預制自動焊接中心(卡盤+卡盤)
                    • 管道預制自動焊接中心(卡盤+卡盤)
                    • 管道預制自動焊接中心(卡盤+卡盤)


                    功能介紹 Function introduction

                    管道預制自動焊接中心(卡盤+卡盤)Pipe Fabrication Automatic Welding Center(Chuck + Chuck)


                    Product Model: PFFWC-16Ca/24Ca/32Ca/48Ca


                    Pipe Diameter Applicable: DN400/DN600/DN800/DN1200

                    性能特點:適用于“法蘭+管子+法蘭”類管段的焊接;焊接效率提高;2臺固定式帶卡盤的焊接變位器;1套安裝在其上的焊接伸縮臂; 1條15#機加工軌道;兩端同時進行法蘭與管子的組對,組對完成后,兩端同步進行焊口的自動焊接;標配2臺林肯Flextech500多功能焊接電源;采用QSPT打底焊接技術,進行TIG/MIG打底焊接;TIG/MIG/MAG/SAW填充、蓋面焊接;鋁合金線控盒操作

                    Performance features: Suitable for fittingup & welding spool pieces such as “flange + pipe + flange”; welding efficiency increased ; two fixed type welding positioner with chuck; one telescopic boom for welding; one 15# machined rail;After finishing fitting up 2 weld joint at the same time, to start welding automatically simultaneously; standard configuration: 2 Lincoln Flextech500 multi-function welding power; TIG/MIG root welding with QSPT’s root welding technology; TIG/MIG/SAW fill-in and cap welding; operated with an aluminum alloy wire control box.

                    相關產品 Related products

                    ? 2016 上海前山管道技術有限公司  保留所有權利  網站地圖 | 聯系我們